1. Lay out track and connectors on the floor below hanging position. Track lengths (dia "A") are joined by connectors (dia "B") and allen head screws tightened with allen wrench (dia "D"), included in package.
2. Starting at wall, fasten an end mount (Die "C") to the wall using suitable anchors or bolts. Be sure that the dimension from the top of the track to the floor is the same as the height of the curtain you ordered (i.e. 8', 10', or 12' high etc.). The tag on the curtain itself will reflect the height ordered less 3" for track, roller and 1" at floor.
3. Insert the first piece of track into the wall end mount connector and affix with Allen head set screw (dia "D") provided. Slide a track splice connector over the opposite end of the track length, lining up the hole on the top of the track with the first hole on the top of the connector. Then push a 1/4" allen head bolt (provided) through the bottom of the track, attaching the splice itself and the Universal Bracket (for wall and suspend mount applications)*. Tighten with serrated flange nut (dia "F") provided. Secure the track splice to the threaded rod or chain that you have hung from your overhead support (not included). Insert the next track section and repeat the track splice support process, being sure to level the track as you go. (It is helpful when inserting track into splices and end mounts to lightly clamp a pair of vice grips onto the track about 4" from the end to be inserted. This narrows the track and allows easy insertion.)
4. Before attaching the last wall end mount or end stop, slip the roller hooks (dia "G") into the track, making sure that the hooks are hanging out through the bottom of the track as shown.
5. You are now ready to hang your Goff's Curtain Wall. Allow curtains to reach room temperature before unfolding them. Be sure to have the LOGO face out, as this will insure that the Velcro sections will join correctly when combining two or more curtains. Slip rollerhooks into grommet openings, making sure not to drag the curtain on the floor. As each hook is placed into a grommet opening, it is a good idea to crimp the hook partially shut with a pair of pliers to insure that the grommet stays on the hook
TOP
